Main Drive Motor Control Jam Service Check; Printhead Motor Control Jam Service Check - Lexmark MX81 Series Service Manual

Action
Step 13
Perform a print test.
Does the problem remain?

Main drive motor control jam service check

Action
Step 1
Check the main drive motor and the socket "TRANSPORT MTR" on the
controller board for proper connection.
Is the main drive motor properly connected?
Step 2
Reset the machine.
Does the error continue?

Printhead motor control jam service check

Action
Step 1
Ensure the cables for sockets "MIR MTR" and "VIDEO" on the controller
card are properly connected and not damaged.
Are the cables connected and undamaged?
Step 2
Reset the machine.
Does the error continue?
Step 3
Reset the machine.
Does the error continue?
Yes
Contact the next level
of technical support.
Yes
Replace the main drive
motor. See
motor removal" on
page
Replace the controller
board. See
board removal" on
page
Yes
Go to step 2.
Replace the printhead.
See
removal" on page
320.
Replace the controller
board. See
board removal" on
page
Diagnostic information
63
No
Problem solved.
No
Reseat the connection.
"Main drive
Go to step 2.
391.
Problem solved.
"Controller
386.
No
Reseat the
connections.
Go to step 2.
Problem solved.
"Laser printhead
Problem solved.
"Controller
386.
7463