Entering Configuration Mode; Roller Kit Counter Value; Reset Roller Kit Counter; Reset Separator Roll And Pick Assembly Counter - Lexmark MX81 Series Service Manual

•
"USB Speed" on page 264
•
"Automatically Display Error Screens" on page 264
•
"USB PnP" on page 264
The Configuration menu group consists of menus, settings, and operations that are used to configure a printer for
operation.

Entering configuration mode

The Configuration Menu group contains a set of menus, settings, and operations which are infrequently required by a
user. Generally, the options made available in this menu group are used to configure a printer for operation.
1
Turn off the printer.
2
Press and hold the 2 and 6 buttons simultaneously.
3
Turn on the printer.
4
Release the buttons after 10 seconds.

Roller Kit Counter Value

When this setting is selected, the printer displays the current value for the Roller Kit counter. A print job containing a
single page increments the counter by one and a duplex page by two. When the value has reached the rated life of the
Roller Kit, it reminds the customer that scheduled maintenance is required. Reset this counter after an 81 Replace
Roller Kit message displays and a Roller Kit is installed. See
To view the maintenance kit count:
1
From the Configuration menu, navigate to Roller Kit Counter Value.
The value is displayed and cannot be changed.
2
Press Back or X to return to the Configuration menu.

Reset Roller Kit Counter

After scheduled maintenance, the roller count value must be reset to zero.
To reset the maintenance count value to zero:
1
From the Configuration menu, navigate to Reset Roller Kit Counter.
2
Depending on the printer model, press OK or touch
the counter.
Once initiated, the reset operation cannot be canceled. When the operation is complete, the menu returns to the main
Configuration Menu.

Reset Separator Roll and Pick Assembly Counter

After scheduled maintenance, the roller count value must be reset to zero.
"Reset Roller Kit Counter" on page
to reset the counter, or press X to exit without resetting
Service menus
252
7463
252.