Adf Not Responding Service Check; Option Tray Symptoms - Lexmark MX81 Series Service Manual

Action
Step 3
Check the sensor (ADF media present) for proper connection.
Is the above component properly connected?

ADF not responding service check

Action
Step 1
Check the sensor (ADF closed interlock) for proper operation.
a
Enter the Diagnostics Menu.
b
Touch SCANNER TESTS.
c
Touch Sensor Tests.
d
See the line item "sensor (ADF media interlock)."
Does the display on the operator panel change every time the sensing
area of the above sensor is interrupted or blocked?
Step 2
Check the sensor (ADF media interlock) for proper connection.
Is the above component properly connected?

Option tray symptoms

Symptom
The finisher detects the side door as open even when it is closed.
Media doesn't exit at the assigned bin.
The stapler unit does not detect the staple cartridge.
The staple finisher option is not detected or recognized.
The staple finisher detects media even when the bin is cleared.
The finisher detects the rear door as open even when it is closed.
The stapler unit won't staple.
The stapler bin LED doesn't light up, media isn't detected on the
output bin.
Yes
Replace the Sensor
(ADF media present).
Go to
media present)
removal" on page
493.
Yes
Go to step 2.
Replace the sensor
(ADF closed interlock).
Action
Go to
page 218.
Go to
page 220.
Go to
page 221.
Go to
page 222.
Go to
page 223.
Go to
page 224.
Go to
page 225.
Go to
check" on page
Diagnostic information
207
No
Replace the
connection.
"Sensor (ADF
No
Replace the sensor
(ADF closed interlock).
Replace the
connection.
"Finisher side door error service check" on
"Mailbox incorrect bin exit service check" on
"Finisher cartridge error service check " on
"Finisher undetected service check" on
"Finisher bin error service check " on
"Finisher door undetected service check " on
"Stapler carriage failure service check" on
"Finisher bin media present error service
226.
7463