Supported Paper Sizes, Types, And Weights; Paper Types And Weights Supported By The Printer - Lexmark MX81 Series Service Manual

Hide thumbs Also See for MX81 Series:

Table of Contents

ADF media feed and transport components

ADF pick roller—This roller is used to begin the feed process into the ADF.

ADF feed belt—This belt is used to feed the pick media into the ADF.

ADF separator roller and torque limiting clutch—This roller and clutch are used to ensure that only a single sheet

of media is fed into the ADF.

ADF registration roller—This roller is used to set timings and remove skew from media that is being fed into the

ADF transport roller—This roller is used to transport media through the ADF.

ADF exit roller—This roller is used to feed media out of the ADF and into the ADF bin.

Supported paper sizes, types, and weights

"Paper types and weights supported by the printer" on page 790

"Paper sizes supported by the printer" on page 791

"Paper sizes, types, and weights supported by the optional finishers" on page 792

The following tables provide information on standard and optional paper sources and the types of paper they support.

Note: For an unlisted paper size, select the closest larger listed size.

The printer engine supports 60–176‑g/m

Paper labels

Vinyl Labels

(16–47‑lb) paper weights.

250‑ or 550‑sheet

2100‑sheet tray

Appendix C: Theory of operation

Multipurpose feeder

Show Quick Links

Table of Contents