Sensor (Adf Elevator Tray Home Position) Removal - Lexmark MX81 Series Service Manual

4
Pull the sensor bracket to access the sensor. Disconnect the cable (B).
5
Release the latches securing the sensor to the bracket, and then remove the sensor.

Sensor (ADF elevator tray home position) removal

1
Remove the ADF rear cover. See
2
Remove the mylar and release the hooks securing the sensor (ADF elevator tray home position) to the machine.
3
Remove the sensor (ADF elevator tray home position).
"ADF rear cover removal" on page 470
Repair information
477
7463