A5 Loading; Ui Automation; Les Applications - Lexmark MX81 Series Service Manual

To change the setting:
1
From the Configuration Menu, navigate to Require Standby.
2
Select On or Off to change the setting.
3
Depending on the printer model, press OK or touch
Menu without saving any changes.
If Standby Mode is On, the printer begins functioning in Standby Mode when it remains idle for an amount of time.
The Standby Mode enables the printer:
•
To consume less energy than when operating in normal mode but not as little as when operating in Power Saver.
• To return to the Ready state more quickly than when operating in Power Saver. If set to Off, this setting disables
Standby Mode in the General Settings Menu.

A5 Loading

This determines the orientation used when printing on A5 paper.
Available options:
•
Long Edge—The printer will print A5-size paper in the long-edge feed orientation from all trays.
• Short Edge—The printer will print A5-size paper in the short-edge feed orientation from all trays.

UI Automation

When enabled, this setting creates an ENABLE_UI_AUTOMATION file in the /var/fs/shared/ directory. As long as this
file exists, the printer permits external developers to test the stability of their applications against the printer to make
sure that their applications have an appropriate level of stability. Disabling this setting deletes the file and prohibits
automated testing.
To change the setting:
1
From the Configuration Menu, navigate to UI Automation.
2
Select from the available options to change the setting.
• Enable
•
Disable (default)
3
Depending on the printer model, press OK or touch
Menu without saving any changes.

LES Applications

This setting enables or disables all installed Lexmark Embedded Solution applications.
To change this setting:
1
From the Configuration Menu, navigate to LES Applications.
2
Select from the available options to change the setting.
•
Enable (Default)
• Disable
to save the setting, or press X to return to the Configuration
to save the setting, or press X to return to the Configuration
Service menus
262
7463