At+Qgpscfg="Plane" Configure Plane Mode Used By Mo Agps Session - Quectel LTE Standard Application Note

Reference
Parameter
<gsvext_NMEA_type>
<errcode>

2.1.11. AT+QGPSCFG="plane" Configure Plane Mode Used by MO AGPS Session

This command is used to configure the plane mode (control plane or user plane) to be used by the
Mobile-Originated (MO) AGPS session. This command will take effect after the module is rebooted.
AT+QGPSCFG="plane" Configure AGPS Plane Mode
Write Command
AT+QGPSCFG="plane"[,<plane>]
Reference
Parameter
<plane>
<errcode>
LTE_Standard_GNSS_Application_Note
+CME ERROR: <errcode>
Enable/disable extended GGSV
0 Disable extended GGSV
1 Enable extended GGSV
Integer type. The error code of operation. Please refer to Chapter 4 for
details.
Response
When two parameters are specified, configure the plane
mode used by MO GPS session:
OK
Or
ERROR
When the second parameter is not specified, query the
current setting:
+QGPSCFG: "plane",<plane>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Integer type. The plane mode used by MO AGPS session.
0 User plane without SSL
1 User plane with SSL
2 Control plane
Integer type. The error code of operation. Please refer to Chapter 4 for details.
LTE Standard Module Series
LTE Standard GNSS Application Note
18 / 39