Starting; Shut Down - Goldacres Crop Cruiser G6 Operator's Manual

Starting

Before operating the machine all fluid levels must be
checked in accordance with this manual.
The battery isolator switch must be engaged to
provide power to the machine systems.
To start the engine, the transmission must be in
neutral.
Insert the ignition key and turn clockwise. The
ignition key is located on the rear right console.
Key Positions
The key has 4 positions, however only the first 3 are
used on this machine.
1. Off, vertical position.
2. On/accessories, in this position all cabin
components will be energised.
3. Not Used.
4. Start, this is a momentary position which can
only be achieved by holding the key hard in
this position, the engine will be cranking if the
transmission is in neutral. Once released the key
will return to the On/accessories position.
To shut down the engine rotate the ignition key
counter clockwise until in the vertical 'Off ' position.
OFF

Shut Down

1. Bring the machine to a complete stop.
2. Place the gear selector in NEUTRAL.
3. Activate the park brake switch. The ladder will
go down.
4. Turn the key to the OFF position.
5. Wait for a minimum of 30 seconds before
turning the isolator switch to OFF. This allows
time for the engine data to be saved back to the
ECM.
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0
ON/ACCESSORIES
I
II
NOT USED
III
IV
START
Chapter 7 - Pre-Operation - 69