Cantrak System - Goldacres Crop Cruiser G6 Operator's Manual

CANtrak System

Understanding GEM
Generic Engine Monitor (GEM) software runs on
a CANtrak display with five soft keys, providing
a flexible and intuitive Human-Machine Interface
(HMI). The 5 soft keys access a graphical menu
structure that uses standard and easily-understood
icons to indicate the key's current function. This
enables the operator to select the required engine
and transmission data and display it in the following
formats:
• Analogue gauges
• Digital values
• Multi-gauge/data (a combination of above)
• Historical trend graphs
• Current or stored alarm messages
34 - Chapter 4 - Cabin
Additionally, various diagnostic screens are available,
allowing detailed investigation of the engine
and transmission data stream. By accessing the
Configuration menu, users can customise some of
the displayed data to show, for example, metric or
imperial units, and various parameters such as the
full-scale reading of gauges.
Pressing any of the first 4 keys (GEM keys are
numbered 1 to 5, from left to right) brings up the
top level 'button bar' (navigation menu).
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0
Continued over page