Operator's Seat - Goldacres Crop Cruiser G6 Operator's Manual

Operator's Seat

NO. FEATURE
1. Fore / Aft Adjustment
2. Fore / Aft Locking lever
3. Seat Depth Adjustment
Seat Pan Angle
4.
Adjustment
5. Height Adjustment
6. Tilt
7. Arm Rest Adjust
8. Lumbar
9. Seat Belt
18 - Chapter 4 - Cabin
3 4
POSITION SETTING INSTRUCTIONS
By lifting this lever the seat can be slid backwards or forward to the
desired position.
Release this lever to enable the Fore & Aft adjustment of the seat, and
engage to lock the seat to the desired position.
To adjust the depth of the seat cushion, pull the handle upwards. By
moving the seat cushion backwards the desired seating position can be
reached.
To adjust the angle of the seat pan, pull the handle upwards. By exerting
pressure on or off the front or rear part of the seat pan it can be
moved to the desired position.
By lifting this lever air will be pumped in to the airbag suspension. By
lowering this lever air is exhausted from the air bag.
The lever on the right hand side of the seat allows the back rest to be
tilted forward or rearward. Pulling the lever forward releases the back
rest so it can be repositioned.
By turning this knob the arm rest can be lowered or raised to suit.
By turning this handle the lumbar in the back of the seat will increase or
decrease the pressure on the operators back.
Operator lap seat belt must be fitted when ever the operator is seated
in the cabin.
7
1
5
2
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0
8
6
9