Goldacres Crop Cruiser G6 Operator's Manual page 82

Joystick Control
Plumbing Controls
LEFT FENCE LINE JETS
Press the black oval button forward once and the
left fence line nozzle on the left hand end of the
boom is activated. When activated, a red LED on
the console and red LED on the boom tip will be
illuminated. To switch off the fence line nozzle, press
the button once more.
RIGHT FENCE LINE JETS
Press the black oval button forward once, the right
fence line nozzle on the right hand end of the
boom are activated. When activated, a red LED on
the console and red LED on the boom tip will be
illuminated. To switch off the fence line nozzle, press
the button once more.
Auto Steer & Cruise Control
AUTO STEER ON/OFF
Press to cycle customer fitted auto steer ON/OFF.
CRUISE SET/DECREASE
When the top black rocker button is depressed
the current ground speed will be set as the cruise
control speed. The cruise switch on the console must
be in the ON position for this to engage and the
foot brake must be released. Once cruise control is
engaged, depressing the top rocker button down will
decrease ground speed. To disable cruise control the
Cruise OFF switch can be cycled to the off position
or the foot brake can be engaged.
CRUISE RESUME/INCREASE
When the bottom black rocker button is depressed,
the cruise control will resume the ground speed that
was previously set before the system was disabled
by the foot brake or the cruise off switch. The cruise
switch on the console must be in the ON position
for this to engage and the foot brake must be
released. Once cruise control is engaged, depressing
the bottom rocker button down will increase ground
speed. If the engine ignition has been cycled a new
cruise speed will have to be set. To disable cruise
control the Cruise OFF switch can be cycled to the
off position or the foot brake can be engaged.
CRUISE CANCEL
Pressing the yellow button will cancel the currently
active cruise control. Simulates pressing the brake
pedal.
78 - Chapter 8 - Operation
NOTE: Cruise control should not be engaged when
RPM Raise is switched on.
NOTE: The transmission will not engage any gear
from neutral if the engine is running over 1000 RPM.
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0