Goldacres Crop Cruiser G6 Operator's Manual page 189

Groeneveld Auto Greaser - Meter Unit Operation
PHASE C. During the next lubrication cycle, the
same happens as in phase A. Chamber (8) however,
is now filled with grease. As plunger (4) moves right
under influence of the grease pressure, the grease
Right: Meter unit in
phase C
IMPORTANT: It is not advisable to open the
metering units as this allows the entry of dirt, and
thus is a potential cause of faults and failures.
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0
in chamber (8) is pressed, via chamber (6) and the
secondary grease line, to the grease point. During all
this, O-ring (9) is pressed outward to allow the grease
to leave chamber (8).
Chapter 12 - Optional Accessories - 185