Lighting - Goldacres Crop Cruiser G6 Operator's Manual

Lighting

Controls
ITEM FEATURE
A Headlights
B Front Work Lights Inner
C Front Work Lights Outer
D Rear Work Lights
NOTE: To cycle between high and low beam the
steering column multi function stick is used. The
headlights must be turned on overhead first.
NOTE: Front and rear work lights will not function
unless the headlight switch is in position 1, 2 or 3.
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0
A B
POSITION FUNCTION
C
0 Off
1 Cab interior lights, Tail Lights, Outer Boom Marker lights.
2 & 3 Headlights + All of the above ON
0 OFF
1,2 & 3 Inner front work lights ON
0 OFF
1,2 & 3 Outer front work lights ON
0 OFF
1,2 & 3 Rear work lights & Night Pro LED boom lights ON
D
Chapter 4 - Cabin - 25