Glossary - Goldacres Crop Cruiser G6 Operator's Manual

Glossary

• CAN: Controller Area Network (also referred to
as CANbus); serial communications protocol for
automotive use
• CANtrak: Intelligent CAN-compatible LCD
display module
• GEM: Generic Engine Monitor
• GPS: Global Positioning System
• HMI: Human-Machine Interface
• ISO: International Standard Organisation
• J1939: SAE engine data protocol using CAN 2.0B
• LCD: Liquid Crystal Display
• NMEA: National Marine Electronics Association;
serial communications protocol for marine use
• PID: Parameter Identifier
• RS-232: Standard electrical interface for serial
communications
• RS-485: Standard differential electrical interface
for serial communications
• SAE: Society of Automotive Engineers Inc.
• SID: Subsystem Identifier
• Soft keys: Push-button keys whose function
changes according to use
• SPN: Suspect Parameter Number: J1939-specific
fault code ID number
NOTE: The messages, icons, error codes etc
displayed by GEM conform to J1939 standards
wherever possible.
54 - Chapter 4 - Cabin G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0