Goldacres Crop Cruiser G6 Operator's Manual page 184

Groeneveld Auto Greaser - Components
Meter Distribution Block
The meter unit distribution block is a brass fitting
that holds multiple meter units. It has a port to
attach the main grease line in and a main grease
line out if there are further banks to feed off that
line. If there are no further banks, one of the 2 main
grease line ports can be closed with a screw in blank.
Any unused meter points will be terminated with a
blanking plug.
Above & Right: Bare meter distribution block
Above & Right: Fully fitted meter distribution block
180 - Chapter 12 - Optional Accessories
IMPORTANT: Do not open any of the blanked
ports or meter units. This can allow contaminants
into the lines and thus be a potential cause of faults
or failures.
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0