Cantrak System - Parameters Monitored - Goldacres Crop Cruiser G6 Operator's Manual

CANtrak System - Parameters Monitored

Engine & Transmission
Parameters Monitored
This table lists the engine and transmission
parameters that can be displayed by GEM and
which may be shown in user-configurable Quad
Display and Uni Display modes (a tick indicates the
parameter may be selected). DB is an abbreviation
for GEM's internal database, which stores all data
transmitted from the engine/transmission. It can be
accessed via the Configuration menu. (Note that
this list is current at the time of going to press, new
parameters are continually being added - the latest
list may be found in the latest GEM data sheet
available at <http://www.cantrak-int.com>).
38 - Chapter 4 - Cabin
Abbreviations: The units 'MPG' and 'Gal' denote US
gallons. For non-US Imperial gallons (UK, Canada,
etc) units, these units are denoted as IMPG or IGal.
N = nautical. KTS = Knots.
NOTE: If a parameter is not available, it will not
be possible to select it. If the parameter becomes
unavailable while in view, '- - -' is displayed.
G4.7, G5, G6 Crop Cruiser Operator's Manual MY19 - REV 0
Continued over page