3053-3
FILM POCKET CHAIN LENGTH
PURPOSE:
If the CHAIN is too short, it is impossible to take out all FILMS from a MAGAZINE #7. If the
CHAIN is too long, the COUNTERWEIGHT will rest on the BASE before the FILM POCKET
reaches the CASSETTE LEVEL.
1
.
Loosen NUTS.
2
.
To make the CHAIN shorter rotate NUTS clockwise.
3
.
To make the CHAIN longer rotate NUTS counterclockwise.
4
.
Check that the COUNTERWEIGHT does not touch the bottom or top of the FRAME
when the FILM POCKET is at the CASSETTE LEVEL or the MAGAZINE SUCKER BAR
moves into MAGAZINE 7 when this MAGAZINE is empty.
5
.
Tighten NUTS.
FILM POCKET REFERENCE POSITION
PURPOSE:
To set the REFERENCE BRACKETS to the correct MAGAZINE Positions (1...7) and
CASSETTE Position, to make the MAGAZINE SUCKER BAR moves freely into CASSETTE
and MAGAZINES.
1
.
Disconnect the power from ML 700.
2
.
Move SERVICE SWITCH on PCB A0 to the right.
12/1998
figure 4-76
4-72
ADJUSTMENTS
KODAK AG, Stuttgart