Table of Contents
Advertisement
ADJUSTMENTS
1
.
Enter SERVICE MODE . FDAB Day,Day,9,9.
2
.
Select option 6 ( SENSOR TEST).
3
.
Move the GUIDE RAIL completely down.
4
.
Adjust the position of the PHOTO SENSOR B21 (MMC), so that the SENSOR
ACTUATOR BLADE is well in the SENSOR. Use the SENSOR TEST as an indication.
5
.
Move the GUIDE RAIL completely up.
6
.
Adjust the position of the PHOTO SENSOR B20 (MMO), so that the SENSOR
ACTUATOR BLADE is well in the SENSOR. Use the SENSOR TEST as an indication.
7
.
If it is not possible to do the adjustment in step 4 or 6 check the adjustment of the
MAGAZINE OPENER.
8
.
Leave the SERVICE MODE.
9
.
Key in 3585 to bring all MOTORS to HOME POSITION.
CASSETTE ENTRY
PURPOSE:
CASSETTE ENTRY should be smooth.
Note
IF THE BRACKET IS ADJUSTED TOO LOW SWITCH S8 (PRL) WILL NOT BE ACTUATED.
1
.
Adjust ENTRANCE ROLLER until the CASSETTE moves on the ENTRANCE ROLLER
and not on the ENTRANCE PLATE (stainless steel).
KODAK AG, Stuttgart
figure 4-6
4-5
3053-3
12/1998
Advertisement
Table of Contents
