ADJUSTMENTS
MAGAZINE EMPTY SENSOR
PURPOSE:
This adjustment makes sure that a MAGAZINE is recognised as being empty after the last
FILM is removed.
1
.
Insert an empty MAGAZINE into position 4.
2
.
Enter SERVICE MODE.
•
Select OPTION 7.8.1 (FILM POCKET) and transport the FILM POCKET to LEVEL 4.
•
Select OPTION 7.6 (OPEN CLOSE MAGAZINE).
•
Select MAGAZINE 4 and open it.
3
.
Rotate the MAGAZINE SUCKER BAR fully in.
4
.
Look across the SENSOR MAGAZINE EMPTY B10 (ME), to the MIRROR and then to
the REFLECTIVE STICKER in the MAGAZINE.
5
.
If the REFLECTIVE STICKER is not visible open the MOUNTING SCREWS of
SENSOR B10 (ME) and move it up or down until the REFLECTIVE STICKER becomes
visible. If necessary adjust the position of the MIRROR.
6
.
Tighten the SCREWS.
KODAK AG, Stuttgart
MIRROR
SENSOR B10
figure 4-73
4-69
3053-3
REFLECTIVE
STICKER
MAGAZINE
12/1998