Processing Film; Start-Up - Kodak X-Omat 2000 Operator's Manual

OPERATORS MANUAL
Section 2: Processing Film

Start-Up

Main Power Switch
Figure 1
TOP COVER
RUN/STANDBY
SWITCH
MAIN POWER SWITCH
Water Inlet Tube of the Wash Tank
Figure 2
WATER
2 EVAPORATION
INLET TUBE
COVERS
TOP
COVER
H172_1000ACA
H172_1000AC
4
RUN/STANDBY
SWITCH
Keep fingers, clothing, cleaning materials, etc., away
from the moving parts of the Processor.
[1] Turn on the water supply and the Main Power
[2] Remove the Top Cover.
TEMPERATURE
READY LIGHT
H172_0501ACC
H172_0501AC
[3] Check the following are seated correctly.
DRYER
TEMPERATURE
CONTROL
KNOB
[4] Check:
Warning
Switch.
(See Figure 3.)
• Developer Rack
• Fixer Rack
• Wash Rack
• Fixer/Wash Crossover Assembly
• Developer/Fixer Crossover Assembly
• Detector Crossover Assembly
• Dryer Assembly
• developer, fixer, and wash solutions are at the
overflow level of the Weirs
• water is flowing from the Water Inlet Tube of
the Wash Tank
• Evaporation Covers are installed
19JAN99 – 7C8770