Table of Contents
Advertisement
ADJUSTMENTS
23.
Check that the MAGAZINE BLOW PIPES are still in the correct position in the
MAGAZINE.
ADJUSTMENT OF FILM POCKET TIMING DISKS
PURPOSE:
This adjustment gives the correct TRANSPORT POSITION (TP) and MAGAZINE SUCKER
BAR IN POSITION (MSI). TRANSPORT POSITION 1 is set automatically when MAGAZINE
SUCKER BAR IN POSITION is adjusted.
Note
Before doing this procedure the ADJUSTMENT POSITION OF MAGAZINE SUCKER BAR
section has to be correct.
MAGAZINE SUCKER BAR IN POSITION
1
.
Start the SENSOR TEST.
2
.
Rotate the SUCKER BAR ARM into an upright (vertical) position.
3
.
Make sure that the BALL BEARING is engaged in the DETENT .
SUCKER BAR
ARM
KODAK AG, Stuttgart
figure 4-68
4-65
3053-3
DETENT
BALL BEARING
12/1998
Advertisement
Table of Contents
