Table of Contents
Advertisement
3053-3
7
.
Lift the ACTUATOR WIRE of S1 (CO) for 40 mm. S1 must now be actuated.
8
.
If necessary, CAREFULLY bend the ACTUATOR WIRE of S1.
9
.
Leave SERVICE MODE.
10
. Key in 3585 to bring all MOTORS to HOME POSITION.
CASSETTE LENGTH DETECTION
PURPOSE:
To set the INDEX BAR (Slotted Bar) that the correct number of CASSETTE LENGTH
PULSES is counted. This number combined with the actuation of SWITCH S2(CW2) and
S3(CW3) gives the CASSETTE SIZE.
Note
This adjustment can be done with the following cassette lengths:
40 cm X, 35 cm X, 30 cm X, 24 cm X
10 in V, 10 in X, ( X=X-OMATIC V=VIDEO FILM HOLDER)
1
.
Enter SERVICE MODE. FDAB ,Day,Day,9,9
2
.
Select Option 7.1
3
.
Select OPTION 6 (SENSOR TEST ).
4
.
Manually move in the CENTRING BARS until the SWITCHES S 14/15 ( CCS ) are
actuated.
12/1998
figure 4-22
Feed in a CASSETTE.
4-20
ADJUSTMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
