Table of Contents
Advertisement
Section 2: Processing Film
Start-Up
Main Power Switch
Figure 2
TOP COVER
DIGITAL
TEMPERATURE
DISPLAY
Water Inlet Tube for the Wash Tank
Figure 3
WATER INLET
TUBE
EVAPORATION
COVER (2)
TOP
COVER
981799 - 09JUL98
MAIN
POWER
SWITCH
H112_0043ACA
H112_0043AC
DRYER
TEMPERATURE
CONTROL
KNOB
STD/EXT
SWITCH
H112_0029ACB
H112_0029AC
Use only qualified service personnel to perform
all necessary adjustments and procedures.
Warning
Keep fingers, clothing, cleaning materials, etc., away
from the moving parts of the PROCESSOR.
[1] Turn on:
• water supply
• Main Power Switch
[2] Remove the Top Cover.
[3] Check:
(a) the following are seated correctly. See
Figure 4 on the next page.
• Developer Rack
• Fixer Rack
• Wash Rack
• Fixer/Wash Crossover Assembly
• Developer/Fixer Crossover Assembly
• Detector Crossover Assembly
• Dryer Assembly
(b) the developer, fixer, and wash solutions are
at the overflow level of the Weirs.
(c) water is flowing from the Water Inlet Tube
of the Wash Tank.
(d) the Evaporation Covers are installed.
Processing Film
5
Advertisement
Table of Contents
