Table of Contents
Advertisement
ADJUSTMENTS
2
.
Connect DVM to CAPACITOR C 21 on PCB A0. You should have 5.2 to 5.3 VDC. If
not, reseat A0X7 and A1X20 CONNECTORS.
3
.
Check for any AC ripple across V4 on POWER SUPPLY. Should be < 100 mV AC
ripple. If more replace POWER SUPPLY.
MAGAZINE OPENER
PURPOSE:
The MAGAZINE LID must be fully opened otherwise the MAGAZINE SUCKER BAR will hit
the edge of the MAGAZINE LID.
Note
MAGAZINE LID MUST NOT TOUCH THE BOTTOM OF THE MAGAZINE ABOVE.
1
.
Loosen LOCKNUT (left-hand thread).
2
.
Adjust length of ACTUATOR if necessary.
3
.
Enter SERVICE MODE. FDAB,Day,Day,9,9
4
.
Select-Option 7.6 (Open-Close MAGAZINE).
KODAK AG, Stuttgart
figure 4-4
4-3
3053-3
12/1998
Advertisement
Table of Contents
