Table of Contents
Advertisement
ADJUSTMENTS
DOUBLE FILM SENSOR B14 (DFS) ML700 Plus
PURPOSE:
To ensure that only 1 FILM is picked up from the MAGAZINE.
FUNCTIONAL DESCRIPTION:
The fresh FILM picked up from the MAGAZINE goes in between the 2 DETECTOR ROLLERS
of the DOUBLE FILM SENSOR. The DETECTOR ROLLERS become separated by the FILM.
This causes the arm of the DOUBLE FILM SENSOR to move through PHOTO SENSOR DFS
B14. The end of this arm is slotted. If there is just 1 FILM between the DETECTOR
ROLLERS the IR light from the SENSOR TRANSMITTER will pass through the slot. If there
are more than 1 FILM or no FILM or the CARDBOARD from the FILM BOX between the
DETECTOR ROLLERS, the slot will be at a different position and no IR light can pass
through the solid part of the DETECTOR ARM. Up to 3 attempts will be made to pick up 1
FILM from the MAGAZINE. If attempt 3 is still unsuccessful the cycle will be aborted and a
ERROR MESSAGE is displayed.
KODAK AG, Stuttgart
figure 4-80
4-77
3053-3
12/1998
Advertisement
Table of Contents
