Table of Contents
Advertisement
ADJUSTMENTS
7
.
Leave SENSOR TEST.
8
.
Eject the CASSETTE.
9
.
Leave SERVICE MODE.
10.
Key in 3585 to bring all MOTORS to HOME POSITION.
CASSETTE CENTRING
PURPOSE:
The CENTRE of the CASSETTE CENTRE should be aligned with the CENTRE of the
MAGAZINE CENTRE in order to transport the unexposed FILM correctly into the CASSETTE.
1
.
Feed in an empty X-Omat CASSETTE (largest size available).
2
.
During loading observe that the FILM is centred in the CASSETTE.
3
If the FILM is not centred within ± 0.5 mm do step 4. Otherwise do step 5.
.
4
.
Loosen the 4 BELT SUPPORT MOUNTING SCREWS. Move the BELT SUPPORT to
the desired place. Do step 1 to 3 again.
KODAK AG, Stuttgart
figure 4-18
4-17
3053-3
12/1998
Advertisement
Table of Contents
