Table of Contents
Advertisement
3053-3
CASSETTE BLOW PIPES
PURPOSE :
Air pressure from the BLOW PIPES should lift the FILM from the CASSETTE LID.
1
.
Take a CASSETTE 18x24 cm.
2
.
Enter SERVICE MODE FDAB , DAY, DAY, 9, 9.
3
.
Select OPTION 7.1 (FEED CASSETTE) and feed in the CASSETTE.
4
.
Select OPTION 7.2 (ALIGN CASSETTE) and centre the CASSETTE.
5
.
Select OPTION 7.3 (OPEN CASSETTE) and open the CASSETTE.
6
.
Loosen the SETSCREWS of the BLOW PIPES.
SET SCREW
7
.
Check for a distance of 14 to 14.5 mm between tip of BLOW PIPES and the upper
edge of the PLATE.
8
.
Adjust BLOW PIPES to an angle of approx. 30 degrees to the CASSETTE EDGE.
9
.
Fasten SETSCREWS.
10
. Leave SERVICE MODE.
11
. Key in 3585 to bring all MOTORS to HOME POSITION.
12/1998
BLOW PIPE
figure 4-50
4-48
BLOW PIPES
CASSETTE LID
ADJUSTMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
