Table of Contents
Advertisement
ADJUSTMENTS
CASSETTE FILM PRESENCE DETECTOR and
CASSETTE TYPE 2 SENSOR.
PURPOSE:
To align the FILM PRESENCE DETECTORS to the MIRRORS and to the REFLECTIVE
STICKERS in the CASSETTE, to obtain maximum output.
Note
The same procedure is used for FILM PRESENCE DETECTOR TOP (FPDT) and FILM
PRESENCE DETECTOR BOTTOM (FPDB).
1
.
Start the SERVICE MODE FDAB ,Day,Day,9,9.
2
.
For TYPE 2 SENSOR continue with step 19.
3
.
Select option 7.1( FEED CASSETTE ). Feed in a CASSETTE 18x24 cm.
4
.
Select Option 7.2 (ALIGN CASSETTE ). Centre CASSETTE.
5
.
Select Option 7.3 (OPEN CASSETTE). Open CASSETTE.
6
.
Loosen the SENSOR and BRACKET SCREWS.
SENSOR SCREWS
BRACKET SCREW
7
.
Set GAIN of the SENSOR to maximum.
KODAK AG, Stuttgart
GAIN
figure 4-51
4-49
3053-3
12/1998
Advertisement
Table of Contents
