3053-3
Note
The CASSETTE SUPPORT should rest on the 2 ADJUSTMENT SCREWS. Otherwise it
moves down during a cycle.
3
.
Fasten the MOUNTING SCREWS and the LOCKNUT.
4
.
Check that:
•
CASSETTE TRANSPORT is ok,
•
CASSETTE OPENING is ok,
•
CASSETTE CLOSING is ok.
CASSETTE TRANSPORT
PURPOSE:
CASSETTE should be transported straight in and out.
1
.
Loosen MOUNTING SCREWS of left and right MOUNTING BRACKET.
2
.
Loosen left and right LOCKNUT.
3
.
Adjust the tension of the BELT with both SET SCREWS equally.
4
.
Check that a CASSETTE is transported correctly in and out.
5
.
Fasten LOCKNUTS.
12/1998
figure 4-9
4-8
ADJUSTMENTS
KODAK AG, Stuttgart