Table of Contents
Advertisement
3053-3
CASSETTE CENTRING BRAKE (ML700 without Mod 26)
PURPOSE:
The CENTRING BARS must open the correct distance, after a CASSETTE is centred.
1
.
Feed in a CASSETTE 18 x 24.
2
.
If the CENTRING BARS do not open for approx. 2 mm on each side of the
CASSETTE after CENTRING readjust the BRAKE BELT TENSION with the Adjustment
SCREW.
3
.
Feed in a CASSETTE 35 x 43 cm or 18 x 43 cm.
4
.
The CENTRING BARS should now open 0.3 - 0.5 mm on each side after CENTRING.
Readjust the BRAKE BELT Tension with the ADJUSTMENT SCREW if necessary.
12/1998
figure 4-13
4-12
ADJUSTMENTS
KODAK AG, Stuttgart
Advertisement
Table of Contents
