Table of Contents
Advertisement
ADJUSTMENTS
POSITION OF MAGAZINE SUCKER BAR.
SPECIAL TOOLS:
DENTIST MIRROR TL2753
Note
Do the ADJUSTMENT of FILM POCKET TIMING DISKS after this one is altered.
PURPOSE:
This adjustment makes sure that the BLOWPIPES go into the RECESSES of the MAGAZINE
and that the SENSOR MAE(B16) is interrupted by the MAGAZINE PIN.
1
.
Switch off ML 700.
2
.
Remove the LID of an empty MAGAZINE, load a film with a REFERENCE LINE 3 mm
away from the LEADING EDGE into the MAGAZINE. Insert the MAGAZINE into
LEVEL 7.
3
.
Move FILM POCKET by hand to level 7.
4
.
Rotate the SUCKER BAR ARM into an upright (vertical ) position.
5
.
Loosen SCREW 3.
KODAK AG, Stuttgart
SCREW 2
SCREW 1
figure 4-63
4-61
3053-3
DETENT
BALL BEARING
SCREW 3
12/1998
Advertisement
Table of Contents
