3053-3
FILM REJECTER BRACKET
PURPOSE:
This adjustment makes sure that the FILM REJECTER BRACKET is not interfering with the
MAGAZINES and the FRAME when the FILM POCKET moves up or down and that the
INFRARED LIGHT BEAM of SENSOR MAGAZINE BLOCKED BY FILM B30 (MBF) is not
interrupted.
1
.
Rotate the MAGAZINE SUCKER BAR into TRANSPORT POSITION.
2
.
Loosen the indicated SCREWS.
3
.
Move the STOP PLATE up or down, until the horizontal BAR of the FILM REJECTER
BRACKET with the RUBBER BUMPER is behind the MOUNTING BRACKET of the
MAGAZINE EMPTY SENSOR.
4
.
Tighten the SCREW.
12/1998
RUBBER BUMPER
SCREWS
figure 4-72
4-68
ADJUSTMENTS
STOP PLATE
KODAK AG, Stuttgart