Adjustments And Replacements; Feed Shelf; Adjustment; Detector Switch - Kodak X-Omat 2000 Service Manual

Section 2: Adjustments and Replacements

FEED SHELF

Adjustment

1.5 mm
(0.06 in.)
film entry path
FILM
GUIDE
FEED
SHELF
H172_1017ACA
H172_1017AC

DETECTOR SWITCH

Adjustment
Warning
Moving Parts
[1] Remove the TOP COVER.
[2] Check for squareness:
• DEVELOPER RACK, See Page 9
• DETECTOR CROSSOVER AY, See Page 7
7C8772 – 12JAN99
NIP
DETECTOR
CROSSOVER
ROLLERS
SCREW (4)
DETECTOR ROLLER
2 SCREWS
2 DETECTOR
SWITCHES
SCREW
ROCKER ARM

Adjustments and Replacements

[1] Loosen the 4 SCREWS.
[2] Adjust the height of the FEED SHELF to 1.5 mm
⁄
1
( in.) below the NIP of the DETECTOR
16
CROSSOVER ROLLERS.
[3] Insert a 35 x 43 cm sheet of film into the NIP of
the DETECTOR CROSSOVER ROLLERS.
[4] To adjust for squareness, use the film to align the
FILM GUIDE with the DETECTOR
CROSSOVER ROLLERS.
[5] Tighten the 4 SCREWS.
ROCKER
ARM
2 MAGNETS
2 DETECTOR SWITCHES
1.6 mm
(0.06 in.)
H172_1036BCA
H172_1036BA
5