Mailbox Options: Subscriber: [Lamp/Logon/Transfer]; Lamp/Logon/Transfer Tab; [Lamp/Logon/Transfer] Message Waiting Lamp; [Lamp/Logon/Transfer] Lamp Off String - NEC UX5000 Manual

Mailbox Options: Subscriber: [Lamp/Logon/Transfer]

Lamp/Logon/Transfer Tab

Compatibility Guidelines:
■ When using the UX Mail Administrator to enter dial strings, take care not to enter illegal characters
(such as dashes). Enter only those characters allowed by the option you are programming.
[Lamp/Logon/Transfer]
Use this option to enable or disable Message Waiting lamping at the extension associated with the Sub-
scriber Mailbox. Normally, you should leave this option enabled.
See
●
S
Options
● Yes or No.
Default
✔ Yes
[Lamp/Logon/Transfer]
TBD
[Lamp/Logon/Transfer]
TBD
[Lamp/Logon/Transfer]
Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber
Mailbox. If enabled, each Screened Transfer (TRF) to the extension is converted to an Unscreened Transfer
(UTRF). If disabled, Screened Transfers from the Automated Attendant occur normally.
See
●
S
Options
● Yes or No.
Default
✔ No.
UX Mail Manual
Mailbox Options: Subscriber: [Lamp/Logon/Transfer]
Message Waiting Lamp
for more.
M ( 279)
UBSCRIBER AILBOX PAGE
Lamp Off String
Lamp Off String
Forced Unscreened Transfer
and
T ( 270)
CREENED RANSFER PAGE
U T ( 299)
NSCREENED RANSFER PAGE
Chapter 3: Programming ◆ 433
Customize
for more.
3