Time And Date Stamp; Time And Date Stamp With Caller Id - NEC UX5000 Manual

Time and Date Stamp

Time and Date Stamp
Description
While listening to a message, a Subscriber, Guest, or Message Center Mailbox user can dial TI to hear the
Time and Date the message was left. In addition, a Future Delivery Mailbox caller can dial TI while listening
to an undelivered Future Delivery message to find out when it was sent. With Network Mailboxes, Time and
Date Stamp identifies the message as a network message, announces the sender's mailbox number, and
announces the number of the remote system. Time and Date Stamp is a handy option while reviewing mes-
sages. The subscriber can just dial a code to find out when the message arrived.

Time and Date Stamp with Caller ID

With caller ID installed, a mailbox user can dial TI to listening to a message to hear the time and date the
message was sent, as well as the caller's number.
Related Features
Auto Time Stamp (page 67)
After a user listens to a message, voice mail can optionally announce the time and date the message was left.
Caller ID (page 97)
With Caller ID installed and programmed, the Time and Date Stamp also includes the caller's number.
Listening to Messages (page 173)
Turn to this feature for additional listening options.
Time and Date (page 289)
You can set the system Time and Date from the UX Mail Administrator or from a System Administrator's
Mailbox.
Programming
To get Time and Date Stamp with Caller ID, be sure Caller ID is properly installed and programmed in the
connected UX5000.
Operation
Log onto Subscriber, Guest, or Message Center Mailbox
(5) Access the Message Listen mode
L
TI (84)
0 Plays Help message
290 ◆ Chapter 2: Features
Hearing the Time and Date a Message was Left
Hear the time and date the message was sent
■ Turn to
L M
ISTENING TO ESSAGES
for more on your listening options.
( 173)
PAGE
UX Mail Manual