NEC UX5000 Manual page 122

Centrex Transfer
Step 4
Step 5
Operation
Centrex Transfer operation is automatic once programmed.
104 ◆ Chapter 2: Features
- For the selected mailbox, enter xxxxPPP.
- The digits xxxx represent the Centrex extension you want to dial.
- The entire string must not exceed 15 characters.
- The three pauses (PPP) at the end of the string give the outgoing call time to ring.
✔ By default, there is no Number entry.
Program the Dial Action Table digit that you want to initiate the Centrex Transfer.
4.1 C : D A
USTOMIZE IAL CTION
- Program Action = UTRF.
- Program Number = The number of the mailbox created in step 3 above that handles the
Centrex Transfer.
Review the feature operation.
5.1 H UX M
ERE IS HOW AIL HANDLES THE
- After the Automated Attendant answers, the caller dials the digit for the Centrex Transfer.
- UX Mail puts the call on hold and dials the remote tenant access digits (which is really the
trunk flash Service Code).
- UX Mail then dials the External Extension number (i.e., the Centrex extension number)
and hangs up, leaving the caller connected to the Centrex destination.
T ( 333),
ABLES PAGE FOR AN AVAILABLE KEY
C T
ENTREX RANSFER
( . ., 1):
E G
:
UX Mail Manual