NEC UX5000 Manual page 249

Related Features
Answering Table (page 54)
Determines how the Automated Attendant answers outside calls on each voice mail port.
Automated Attendant (page 68)
The Answering Table determines how the Automated Attendant answers calls.
Call Routing Mailbox (page 88)
The mailbox associated with an Answering Table that specifies which dialing options (Dial Action
Table) and announcements are available to Automated Attendant callers.
Dial Action Table (page 116)
Defines the dialing options for the Call Routing Mailbox chosen by the active Answering Table.
Screened Transfer (page 270)
After an Automated Attendant caller dials an extension, voice mail calls (screens) the destination exten-
sion to see if the transfer can go through.
Unscreened Transfer (page 299)
After an Automated Attendant caller dials an extension, voice mail immediately transfers the call to the
destination and hangs up. Any recalls or additional routing are handled by the UX5000 – just as with any
other unscreened transfer
Programming
Compatibility Guidelines:
■ When using the UX Mail Administrator to enter dial strings, take care not to enter illegal characters
(such as dashes). Enter only those characters allowed by the option you are programming.
Step 1 Assign the MTRF action to a key on the active Dial Action Table.
1.1
Operation
N/A
UX Mail Manual
C : D A T : MTRF A
USTOMIZE IAL CTION ABLE
- Normally, to reach extensions that have mailboxes, the corresponding Number option
should be XXX.
✔ By default, there are no MTRF (Monitored Transfer) Action entries.
Monitored Transfer
– M (R N A
CTION ONITORED ING O NSWER
Chapter 2: Features ◆ 231
2
) T ( 340).
RANSFER PAGE