Port Options Report - NEC UX5000 Manual

Reports

Port Options Report

Port Options Report
Description
Use this report option to show the programming for each voice mail port. All programming from Customize:
Port Options (page 504) is included in the report.
To run the report:
1. From the Main Menu, click on Port Options Report.
2. Enter the starting ( Minimum ) and ending ( Maximum ) ports to include in the report.
3. Enter the report file name (e.g., port-options-4_5_05).
Do not enter a file extension (such as .txt).
●
4. Under Option , select Generate .
● Update Status
● Cancel
● Append
step 3.
5. Click the Port Options Report button. The report will run (see a sample report below).
● To view the report, click Report Results or go to All Reports.
04/06/05
In Service
Allow Lamp callouts . . . . . . . . . . . . . No
Allow Notification/Wake-Up callouts . . . . . Yes
Tenant
Extension . . . . . . . . . . . . . . . . . . None
Answering Schedule Table
Status Monitor
Self Test . . . . . . . . . . . . . . . . . . No
In Service
Allow Lamp callouts . . . . . . . . . . . . . No
Allow Notification/Wake-Up callouts . . . . . Yes
Tenant
Extension . . . . . . . . . . . . . . . . . . None
Answering Schedule Table
Status Monitor
Self Test . . . . . . . . . . . . . . . . . . No
504 ◆ Chapter 3: Programming
+ Port Options Report button updates the report status (e.g., Busy, Done, Idle).
+ Port Options Report button deletes the report.
+ Port Options Report button adds new report data to the bottom of the report specified in
09:20:07
PORT 1 OPTIONS
. . . . . . . . . . . . . . . . . Yes
. . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . No
PORT 2 OPTIONS
. . . . . . . . . . . . . . . . . Yes
. . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . No
. . . . . . . . . . 1
. . . . . . . . . . 1
Page 1
UX Mail Manual