NEC UX5000 Manual page 234

Message Notification
0 Plays Help message at any menu level.
Function
S (Wait for sound)
W (Wait for dial tone)
P (Pause)
M (Monitored pause)
A (Analyzed pause)
*
#
Erase number
To answer a Normal Message Notification callout:
1. Answer callout at programmed destination.
■ Voice mail must hear your answer to proceed.
2. Dial 1 to accept the Message Notification,
OR
Hang up to have Message Notification call back later.
3. Enter the mailbox's Security Code (if requested).
4. You automatically log onto the user's mailbox.
To answer a Radio Pager or Digital Pager Message Notification callout:
1. Operation is automatic.
To answer a Message Delivery Message Notification callout:
1. Answer callout at programmed destination.
Voice mail must hear your answer to proceed.
■
2. You hear all of the mailbox's new messages.
■ The new messages are automatically saved in the mailbox.
216 ◆ Chapter 2: Features
Setting Up Message Notification (Page 3 of 3)
Entering Special Dial Codes
Description
Wait 2 seconds for any constant sound
(such as non-standard dial tone), then
continue if sound is detected.
Wait for CO dial tone and then continue.
Wait 2 seconds and then continue.
Wait 2 seconds, and then continue if busy
tone or reorder tone are not detected.
Wait 4 seconds, and then continue if busy
tone or reorder tone are not detected.
Dials the digit *.
Dials the digit #.
Erases the entire callout number.
Answering a Message Notification Callout
# Go back to Message Notifica-
tion Options Menu without
changing the priority order
Dial Code
*H (*4)
*W (*9)
*P (*7)
*M (*6)
*A (*2)
**
*#
*0
UX Mail Manual