Resetting The Ux Mail Blade - NEC UX5000 Manual

UX Mail Administrator Program

Resetting the UX Mail Blade

You should reset the UX Mail blade after changing the TCP/IP address, gateway address, or DNS address.
You may also need to reset the blade for maintenance purposes. Resetting the blade will also restart the asso-
ciated voice mail application program.
To reset the UX Mail blade:
1. Press the LOAD button on the UX Mail front panel for about 3 seconds until the four front panel LEDS
are on (solid).
2. Release the LOAD button.
3. The UX Mail blade and voice mail application program will restart in about 3 minutes.
20 ◆ Installation
UX Mail Reset LED Patterns
LED
CompactFlash Activity
Voice Mail Application
Voice Mail Port Status
Run Status
After pressing LOAD for 3 seconds
On red
On yellow
On
On green
UX Mail Manual