NEC UX5000 Manual page 263

Operation
Log onto Subscriber, Guest, or Message Center Mailbox
(77) Record and send a message
RS
Record at the tone and press # when you are done.
Options available while recording
Enter the mailbox number(s) to receive the message (up to 10), OR
Dial
*N
After entering a mailbox number (or specifying a mailbox by name).
UX Mail Manual
Message Record to a Network Mailbox
(2) Backup
B
(22) Backup to beginning
BB
* Pause or restart recording
(3) Erase recording
E
TI (84) Hear the time and date you recorded the comment
# Exit recording mode
X (9) Exit your mailbox
0 Plays Help message
(*6) to specify recipients by name.
For Network Remote Mailboxes Only
After entering the Network Remote Mailbox number (recipient)
Enter the number of the mailbox in the remote system to which you want to
send the message + #
C
If specifying recipients by name
N (6) Enter name
Enter 4 or more letters for name + #
*N (*6) Specify recipients by mailbox number (i.e., back up in this menu)
** Erase the message
Enter another mailbox number
(*8) Networking does not support this option.
*U
(*2) Networking does not support this option.
*C
(2) Accept the remote mailbox you entered
I (4) Reject the remote mailbox you entered and re-enter a
new one
* Cancel the current message recipient and back up to
enter a new one
1 Accept the selected name and go to After
entering a mailbox number . . .
# Exit without making a name selection
# Exit without making a name selection
You may hear additional prompts to help you resolve
name conflicts
Networking (AMIS)
Chapter 2: Features ◆ 245
2