Checking The Ux Mail Leds - NEC UX5000 Manual

Ux mail
Hide thumbs Also See for UX5000:
Table of Contents

Advertisement

Checking the UX Mail LEDs

The boot time for UX Mail is about 3 minutes, depending on the tasks the UX Mail has to
perform during startup.
To check the UX Mail LEDs:
1.
After the UX Mail boots, verify the UX Mail front panel LEDs using the following table and the illustra-
tion below.
LED Description
CompactFlash Status
(CF ACTIVE)
(Extreme Left)
Voice Mail Application Status
(Left)
Voice Mail Port Status
(BUSY)
(Right)
Sync Status
(ACTIVE)
(Extreme Right)
.
Voice Mail App Status
CompactFlash Status
UX Mail Manual
UX Mail LED Patterns
Flash Rate
When Flash Rate Occurs
• During CompactFlash card activity (flashes faster as card
Flashing Red
• When UX Mail starts resetting or the system is booting.
On Red
• When CompactFlash card is idle.
Off
• While UX Mail is starting up.
Slow Flash Green
• During normal operation.
On green
(APP)
• When UX Mail starts resetting or the system is booting.
On Yellow
• If UX Mail has failed (stopped running).
On Red
• When power is off.
Off
• During voice mail port activity (flashes faster as port activity
Flashing Red
• When UX Mail starts resetting or the system is booting.
On Red
• When all ports are idle or the power is off.
Off
• During normal operation.
Fast Flash Green
• When UX Mail starts resetting or the system is booting.
On Green
• When power is off.
Off
Currently not used
Figure 5: Checking the UX Mail LEDs
activity increases).
increases).
Load button
UX Mail Installation
Port Status
Run Status
Installation ◆ 5
1

Advertisement

Table of Contents
loading

Table of Contents