[Subscriber] Call Waiting String - NEC UX5000 Manual

Customize
Mailbox Options: Subscriber: [Subscriber]
● P (Pause)
This command waits for 2 seconds and then continues. You can enter a pause command anywhere in
the dial string.
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
● W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
● X - Not used.
@ - Not used.
●
$ - Not used.
●
/ (Park and Page string separator)
●
Use this command to separate the Park (first) portion of the string from the Page (second) portion.
Default
✔ FW*ext/*10M (ext = subscriber's extension number)
Call Waiting String
[Subscriber]
The Call Waiting string is automatically set up during voice mail installation.
Use this option to set up the Call Waiting string. voice mail uses this string send Call Waiting beeps to a busy
extension, indicating that an Automated Attendant call is waiting to be answered.
● To use Call Waiting, the Subscriber Mailbox must have Call Waiting turned on. From the subscriber's
mailbox, use OP + CW + O + # to enable call Waiting.
● Park and Page interacts with Personal Greeting. Paging Message and Personal Greeting disable Call
Waiting.
●
C
ALL
Options
● Digits (20 maximum, using 0-9, # and *)
● N (None)
● A (Analyzed pause)
This command waits for 4 seconds, and then continues if busy tone or reorder tone are not detected.
● F (Flash)
This command hook flashes the voice mail port, which places it on Hold.
- To set the duration of the Flash, go to
● M (Monitored pause)
This command waits for 2 seconds, and then continues if busy tone or reorder tone are not detected.
● P (Pause)
This command waits for 2 seconds and then continues. You can enter a pause command anywhere in
the dial string.)
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
● $ - Not used.
● / - Not used.
● | - Not used.
Default
✔ FW (followed by the extension number)
438 ◆ Chapter 3: Programming
Normally, you should not change this option from its default value.
for more.
W ( 95)
AITING PAGE
[T ] F T ( 474)
IMERS LASH IMER PAGE
.
UX Mail Manual