[Timers] Nonsubscriber Message Length; [Timers] Call Announce Message Length; [Timers] For First Protocol Digit; [Timers] For Subsequent Protocol Digit - NEC UX5000 Manual

Nonsubscriber Message Length
[Timers]
Use this option to set the maximum length of recorded messages for:
Automated Attendant callers leaving a message or Quick Message in Guest, Message Center, Net-
●
work, and Subscriber Mailboxes.
● Outside callers transferred by an extension user to a Message Center Mailbox.
See the following for more:
●
A
UTOMATED
●
G
UEST
●
M
ESSAGE
●
M
ESSAGE
●
N
ETWORKING
●
Q
UICK
●
S
UBSCRIBER
Options
● 1-9999 seconds
Default
✔ 600 seconds
Call Announce Message Length
[Timers]
Use this option to set the maximum length of the Call Announcing Name. When a Subscriber Mailbox has
Call Announcing enabled, this is the name that an Automated Attendant caller must record prior to ringing
that extension.
● See
C
Options
● 1-999 seconds
Default
✔ 10 seconds
For First Protocol Digit
[Timers]
After a voice mail port answers a call, this option determines how long voice mail will wait for the first digit
in the protocol string to be sent from the UX5000.
Options
● 0-99 seconds
Default
✔ 3 seconds
For Subsequent Protocol Digit
[Timers]
After a voice mail port receives the initial protocol digit from the UX5000, this option determines how long
voice mail will wait between each of the subsequent digits.
Options
● 0-99 seconds
Default
✔ 3 seconds
UX Mail Manual
.
A ( 68)
TTENDANT PAGE
.
M ( 157)
AILBOX PAGE
.
C M ( 190)
ENTER AILBOX PAGE
.
L ( 197)
ENGTH PAGE
.
(AMIS) ( 236)
PAGE
M ( 261)
ESSAGE PAGE
M ( 279)
AILBOX PAGE
for more.
A ( 78)
ALL NNOUNCING PAGE
This timer is automatically set during installation. You
should not change this entry from its default setting.
This timer is automatically set during installation. You
should not change this entry from its default setting.
Customize
System Options: [Timer]
Chapter 3: Programming ◆ 473
3