Number - NEC UX5000 Manual

Number

The Number field can contain up to 30 characters. Following are the available commands.
Digits (0-9, # and *)
●
N (None)
●
● [ ] (Entry enclosed in square brackets]
Not used.
● { } (Entry enclosed in brackets).
Use this command with the MTRF, TRF, and UTRF actions to reach extensions that do not have mail-
boxes (e.g., {XXX} or {V}).
● A (Analyzed pause)
This command waits for 4 seconds, and then continues if busy tone or reorder tone are not detected
● C (Stay in current mailbox)
This option assigns the corresponding Action to the currently logged-in mailbox. For example, if
Action is REC1U and Number is C, pressing the assigned key will leave an urgent message in the cur-
rent mailbox. This option does not apply to the LOGON action.
- See
● F (Flash)
This command hook flashes the voice mail port, which places it on Hold.
- To set the duration of the Flash, go to
● H (Hang up)
This command tells voice mail to hang up. To set the duration of the Hang Up Timer, see Customize:
System Options:
● I (Caller dialed digit that is ignored).
This command represents a single caller dialed digit that voice mail will ignore. To ignore more than
one digit, enter more than one I command.
- For example, to have the digit 4 call extension 302 regardless of which digits in the range 400-499
the caller dials, for key 4 enter the Action UTRF and the Number III302.
M (Monitored pause)
●
This command waits for 2 seconds, and then continues if busy tone or reorder tone are not detected.
P (Pause)
●
This command waits for 2 seconds and then continues. You can enter a pause command anywhere in
the dial string.
● R (Retrieve stored digit)
Not used.
● S (Wait for sound)
This command waits 2 seconds for any constant sound (such as non-standard dial tone), and continues
if sound is detected.
● W (Wait for dial tone)
This command waits for CO dial tone, and then continues.
● X (Caller dialed digit)
This command represents a single caller dialed digit that voice mail will recognize. To recognize more
than one digit, enter more than one X command.
- For example, the default entry in Dial Action Table 1 for key 3 is TRF XXX. This means that voice
mail will recognize 3 caller dialed digits, beginning with the digit 3 (e.g., 300 through 399).
● Z (Store dialed digit)
Not used.
Default
✔ See
D
UX Mail Manual
N C R M (
EXT ALL OUTING AILBOX PAGE
[T ] H U T
IMERS ANG P
A T D S
IAL CTION ABLE EFAULT ETTINGS
for more on an application that uses this option.
247)
[T ] F T (
IMERS LASH IMER PAGE
.
( 475)
IMER PAGE
.
( 334)
PAGE
Chapter 3: Programming ◆ 341
Customize
Dial Action Tables
.
474)
3