Transfer Only Mailbox - NEC UX5000 Manual

Transfer Only Mailbox

Transfer Only Mailbox
Description
If a subscriber has a Transfer Only Mailbox, Automated Attendant callers can ring their extension but cannot
leave messages in their Subscriber Mailbox. A Transfer Only Mailbox would be helpful at a courtesy exten-
sion, for example, since there is no need to leave messages at that type of extension. Transfer-Only Mailbox
applies only to the following types of calls:
■ Calls routed from the Automated Attendant using the Screened Transfer (TRF) or Directory Dialing
(DIRF or DIRL) actions.
■ Calls routed from a Directory Dialing Mailbox.
The Subscriber Mailbox must not have a Personal Greeting recorded.
■
The subscriber's extension must not be forwarded to voice mail.
■
The call can only be routed to the extension from the Automated Attendant (Call Routing
■
Mailbox) TRF option, or via Directory Dialing.
If the call is not answered at the Transfer-Only Mailbox, voice mail routes the call back to the Call Routing or Directory
Dialing Mailbox that initially routed it.
Answering Table (page 54)
Determines how the Automated Attendant answers outside calls on each voice mail port.
Automated Attendant (page 68)
The Answering Table determines how the Automated Attendant answers calls.
Call Routing Mailbox (page 88)
The mailbox associated with an Answering Table that specifies which dialing options (Dial Action
Table) and announcements are available to Automated Attendant callers.
Dial Action Table (page 116)
Defines the dialing options for the Call Routing Mailbox chosen by the active Answering Table.
Directory Dialing (page 120)
Directory Dialing will follow Transfer Only Mailbox programming.
Greeting (page 153)
The Subscriber Mailbox which has Transfer Only Mailbox enabled must not have a greeting recorded.
Screened Transfer (page 270)
Screened Transfers will follow Transfer Only Mailbox programming.
Subscriber Mailbox (page 279)
Transfer Only Mailbox is only applicable to Subscriber Mailboxes.
Programming
Step 1
Operation
N/A
292 ◆ Chapter 2: Features
To enable Transfer-Only Mailbox:
Related Features
Designate a Subscriber Mailbox as a Transfer Only Mailbox.
1.1 C : M O
USTOMIZE AILBOX
( 434).
PAGE
- Enable (check) or disable (uncheck) this option as required for Subscriber Mailboxes.
✔ By default, this option is disabled (No).
E : S : [L
PTIONS DIT UBSCRIBER AMP
/L /T ] T
OGON RANSFER RANSFER
UX Mail Manual
-O M
NLY AILBOX