[Subscriber] Pre-Greeting/Closing Announcement Mailbox; [Subscriber] Call Queuing; [Subscriber] Block Auto Attendant; [Subscriber] Desktop Call Control - NEC UX5000 Manual

Customize
Mailbox Options: Subscriber: [Subscriber]
Pre-Greeting/Closing Announcement Mailbox
[Subscriber]
Use this option to set up the Pre-Greeting Announcement Mailbox feature for the Subscriber Mailbox. If
enabled, callers leaving a message in the Subscriber Mailbox hear the Announcement Message recorded for
the specified Pre-Greeting Announcement Mailbox prior to hearing the mailbox's Personal Greeting.
● Clicking on the Pre-Greeting Announcement MB button automatically opens the programming screen
for the designated Announcement Mailbox.
● See
Options
Announcement Mailbox Number (up to 7 digits, using 0-9, # and *).
●
● N (None).
Default
✔ N (None). The default Announcement Mailboxes are 800-809.
Call Queuing
[Subscriber]
Use this option to enable or disable Call Queuing for the Subscriber Mailbox.
● See
Options
● Yes or No.
Default
✔ No.
Block Auto Attendant
[Subscriber]
Use this option to have the Subscriber Mailbox block calls from the Automated Attendant. If enabled, the
mailbox will block Screened Transfers (TRFs), Unscreened Transfers (UTRFs), and Directory Dialing
(DIRF and DIRL). This option will also block calls routed from a Directory Dialing Mailbox.
See
●
Options
Yes or No.
●
Default
✔ No.
✔
Desktop Call Control
[Subscriber]
Not used.
440 ◆ Chapter 3: Programming
P -G A
RE REETING NNOUNCEMENT
for more.
C Q ( 84)
ALL UEUING PAGE
for more.
C B ( 81)
ALL LOCKING PAGE
for more.
M ( 257)
AILBOX PAGE
UX Mail Manual