Throttle Lever; Throttle Cable - Can-Am DS 450 2008 Shop Manual

THROTTLE LEVER

Throttle Lever Removal
Remove the throttle lever housing cover.
vmr2008-029-008_a
1. Cover screws
Slide rubber protector back to expose the throttle
cable adjuster.
vmr2008-029-009_a
1. Rubber protector
Loosen the lock nut.
Screw the adjuster completely.
vmr2008-029-010_a
1. Lock nut
2. Throttle cable adjuster
3. Rubber protector
Remove cable from the throttle lever.
vmr2008-029
Section 08 CHASSIS
Subsection 02 (STEERING)
vmr2008-029-011_a
1. Throttle cable end
2. Throttle lever
Underneath throttle lever housing,
screws securing the housing clamp.
vmr2008-029-012_a
1. Housing clamp
2. Housing clamp screws
Remove throttle lever housing from handlebar.
Throttle Lever Installation
The installation is the reverse of the removal pro-
cedure.
Adjust throttle cable. Refer to
ADJUSTMENT
in this section.

THROTTLE CABLE

Throttle Cable Removal
At Handlebar
Remove the throttle lever housing cover.
remove
THROTTLE CABLE
295