Section 03 ENGINE
Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
vmr2008-009-009_a
1. Breather hose
Unplug spark plug cables.
vmr2008-009-010_a
1. Spark plug cables
Cut all locking ties securing wiring harness on RH
side member.
Unscrew starter cable from starter.
vmr2008-009-012_a
1. Starter cable
Remove the coolant reservoir bolt and move reser-
voir aside to make room.
20
vmr2008-009-013_a
1. Coolant reservoir bolt
Remove bolts securing upper engine supports to
frame.
Remove the RH upper engine support.
vmr2008-009-014_a
1. Engine support bolts
2. RH upper engine support
3. LH upper engine support
Unplug the trigger coil connector.
vmr2008-009-015_a
1. Trigger coil connector
Remove screws securing the air intake adapter to
cylinder head. Discard the air intake adapter seal.
vmr2008-009