Exhaust Pipe - Can-Am DS 450 2008 Shop Manual

Install a NEW muffler gasket.
First, tighten muffler screw.
vmr2008-011-010_a
1. Muffler screw
Then the muffler pipe screw.
vmr2008-011-011_a
1. Muffler pipe screw
And finally, the muffler clamp.

EXHAUST PIPE

Exhaust Pipe Removal
Unscrew nuts securing exhaust pipe to exhaust
port.
vmr2008-011-005_a
1. Exhaust pipe nut (2 other nuts not shown)
vmr2008-011
Subsection 03 (EXHAUST SYSTEM)
Loosen muffler clamp.
vmr2008-011-002_a
1. Exhaust pipe
2. Muffler clamp
Pull exhaust pipe forward to remove it.
Discard the muffler gasket and the exhaust gas-
ket.
vmr2008-011-006_a
1. Muffler gasket
2. Exhaust pipe
3. Exhaust gasket
If necessary, remove heat shield from the exhaust
pipe.
NOTE: Heat screws to break the threadlocker.
vmr2008-011-007_a
1. Heat shield screws
Exhaust Pipe Inspection
Check exhaust pipe for cracks or other damages.
Replace if necessary.
Section 03 ENGINE
31